rlp www.vishay.com vishay sfernice revision: 24-may-13 1 document number: 50009 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 insulated precision wirewound resistors axial leads in wirewound precision resist ors, the rlp series holds a leading position in professional applications whenever an excellent stability of the ohmic value and a correspondingly low temperature coefficient are required at the same time. the rlp model resistors comply with the most stringent requirements of the cecc 40-201-006 specification. the series consists of 5 models covering the power range from 1 w to 10 w. non-inductive versions can be supplied on request by specifying rlp-ni. for higher power dissipations, the use of rh series resistors is recommended. features ? 1 w to 10 w at 25 c ? approved according to cecc 40-201-006 ? according to mil-r-26/5c and mil-r-26/6c ? excellent stability < 0.3 % after 1000 h ? high power up to 10 w at 25 c ? low ohmic values 10 m ? available ? low temperature coefficient ? 50 ppm/c ? electrical insulation ? climatic protection ? termination = pure matte tin or sn/ag/cu according to the ohmic value ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? undergoes european quality insurance system (cecc) dimensions in millimeters series and style a max. ? b max. e 0.1 weight g r > 0.15 ? r ? 0.15 ? rlp1 7 2.5 - 0.6 0.27 rlp2 10.2 4.0 6 0.6 0.48 rlp3 14 5.54 9 0.8 1.3 rlp6 23.82 8.71 11 0.8 3.4 rlp10 46.78 10.32 180k 0.8 8.6 technical specifications vishay sfernice series and st yle rlp1 rlp2 rlp3 rlp6 rlp10 reference cecc 40-201-006 a b c d e cross-referenc e nf c83-210 rp8 rp7 rp4 rp5 rp6 cross-referenc e mil-r-26/5c and mil-r-26/6c rw80 rw81 rw79 rw74 rw78 power rating, pr cecc 40-201-006 power at 25 c, p 25 ? at 70 c, p 70 1 w 0.8 w 1.5 w 1.25 w 2.5 w 2 w -- extended sfernice power at 25 c, p 25 ? at 70 c, p 70 1 w 0.8 w 2 w 1.65 w 3 w 2.5 w 6 w 5 w 10 w 8.2 w ohmic range in relation to tolerance 5 % e24 0.05 ? to 2 k ? 0.025 ? to 6.8 k ? 0.01 ? to 15 k ? 0.02 ? to 59 k ? 0.06 ? to 150 k ? 2 % e48 0.05 ? to 2 k ? 0.025 ? to 6.8 k ? 0.03 ? to 15 k ? 0.02 ? to 59 k ? 0.06 ? to 150 k ? 1 % e96 0.05 ? to 2 k ? 0.025 ? to 6.8 k ? 0.03 ? to 15 k ? 0.02 ? to 59 k ? 0.06 ? to 150 k ? 0.5 % e96 0.4 ? to 2 k ? 0.4 ? to 6.8 k ? 0.0499 ? to 15 k ? 0.3 ? to 59 k ? 0.3 ? to 150 k ? 0.1 % e96 please consult vishay sfernice qualified ohmic value range ? cecc 40-201-006 1 ? to 470 ? 0.2 ? to 1.78 k ? 0.1 ? to 3.57 k ? 0.1 ? to 12.1 k ? 0.1 ? to 40.2 k ? limiting element voltage, u max. ac/dc 50 v 120 v 200 v 300 v 720 v critical resistance out of no minal ohmic range 17 800 w 51 100 w 25 min . 25 min . a 25 min . 25 min. a ? b ? e ? b ? e l max. 4 4 ? a 0.02 rlp1 - r lp2 a = 1 mm rlp3 - 6 - 10 a = 1. 2 mm insul ated molded 45 chamfer max. 0.25 mm deep rlp1 - rlp2
rlp www.vishay.com vishay sfernice revision: 24-may-13 2 document number: 50009 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard electrical specifications model resistance range ? rated power p 25 c w tolerance % rlp1 0.05 to 2k 1 0.1, 0.2, 0.5, 1, 2, 5 rlp2 0.025 to 68k 2 0.1, 0.2, 0.5, 1, 2, 5 rlp3 0.01 to 15k 3 0.1, 0.2, 0.5, 1, 2, 5 rlp6 0.02 to 59k 6 0.1, 0.2, 0.5, 1, 2, 5 rlp10 0.06 to 150k 10 0.1, 0.2, 0.5, 1, 2, 5 mechanical specifications series and style rlp1, rlp2 rlp3, rlp6, rlp10 encapsulant high temperature mold compound high temperature silicone coating resistive elemen t cuni or nicr ceramic substrate alu mina or steatite termination pure matte tin or sn/ag/cu environmental specifications temperature range - 55 c to 275 c climatic category ? (lct/uct/days) 55/200/56 performance tests conditions requirements ( ? r / r or indicated parameter) cecc 40-201-006 short time overload iec 60115-1 6.25 pr extended sfernice power or u = 2 u max. /5 s for rlp1, rlp2, rlp3 12 pr extended sfernice power or u = 2 u max. /5 s for rlp6, rlp10 (0.25 % + 0.05 ? ) load life iec 60115-1 90/30 cycles 1000 h pr extended sfernice power + 25 c (0.5 % + 0.05 ? ) insulation r ? 1 g ? dielectric w/s voltage iec 60115-1 u rms = 500 v/60 s for rlp1, rlp2, rlp3 u rms = 1000 v/60 s for rlp6, rlp10 no flashover or breakdown leakage current < 10 a rapid change of temperature iec 60115-1 iec 60068-2-14 test na 5 cycles (30 at lct/30 at uct) - 55 c/+ 200 c (0.25 % + 0.05 ? ) climatic sequence iec 60115-1 - 55 c/+ 200 c/56 days (0.5 % + 0.05 ? ) humidity (steady state) iec 60115-1 iec 60068-2-3 test ca 95 % hr/40 c 56 days (0.5 % + 0.05 ? ) insulation r ? 100 m ? shock iec 60115-1 iec 60068-2-27 test ea 50 g s/half sine/ 3 times by directio n (i.e. 18 shocks) (0.25 % + 0.05 ? ) vibration iec 60115-1 iec 60068-2-6 test fc 10 hz/55 hz (0.25 % + 0.05 ? ) load life at upper category temperature iec 60115-1 90/30 cycles 1000 h pr extended sfernice power + 200 c (0.5 % + 0.05 ? ) insulation r ? 1 g ?
rlp www.vishay.com vishay sfernice revision: 24-may-13 3 document number: 50009 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 stability and power rating stability changes slightly according to power rating and ambient temperature. this fact is especially important for users needi ng ? a life drift lower than the initial resistance tolerance. typica l drifts, after 2000 h life test made under the 90/30 conditi ons and at an ambient temperatu re of 25 c, are: power rating non inductive winding (ni) non inductive (ayrton pe rry) winding available. ? please consult vishay sfernice. inductance (example) temperature rise marking vishay sfernice trademark, series, style, cecc style (if applicable) nominal resistance (in ? , k ? ), tolerance (in %), manufacturing date. temperature coefficient in the range - 55 c to + 200 c ohmic range requirement cecc 40-201-006 < 1 ? 100 ppm/c 1 ? to < 10 ? 50 ppm/c ? 10 ? 25 ppm/c ohmic range rlp1 rlp2 rlp3 rlp6 rlp10 ? r %/ r % pr 1 w 2 w 3 w 5 w 10 w 0.3 0.5 pr 0.5 w 1 w 1.5 w 2.5 w 5 w 0.15 ambient temperature in c rated power in % 125 100 75 50 37 25 0 0 50 100 150 200 250 275 300 350 frequency in mhz 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.1 1 10 0 rlp3 100 w inductance in h rlp3 ni 100 w packaging (see datasheet 50032 and 50033) reel of 1000 units for rlp1, rlp2, rlp3 ? ammopack of 500 units for rlp1, rlp2, rlp3 ? bag of 100 units for rlp1, rlp2 ? blister of 20 units for rlp3 ? box of 50 units for rlp6, rlp10 rated power in w hot spot temperature in c 250 200 150 100 50 0 0 1.5 3.0 4.5 6.0 7.5 10.0 2 p l r 1 p l r 3 p l r 6 p l r 0 1 p l r
rlp www.vishay.com vishay sfernice revision: 24-may-13 4 document number: 50009 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information rlp 01 5r500 j r15 model style ohmic value tolerance packaging global part number information global model size option ohmic value tolerance packaging special rlp 01 02 03 06 10 n = non inductive winding the first four digits are significant figures and the last digit specifies the number of zero s to follow. r designates decimal point. 680r0 = 680 ? 20301 = 20.3 k ? 88r88 = 88.88 ? ... b = 0.1 % c = 0.2 % d = 0.5 % f = 1 % g = 2 % j = 5 % standard packaging: size 01 and 02: s14 = bag, 100 pieces size 03: b15 = bulk, 20 pieces size 06 and 10: b25 = box, 50 pieces as applicable ex = mex 06150r0 b l p r j0 0
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
